DID Problem

[Andrew]

After configuring mISDN with the B400P card if I configure FreePbx (Asterisk@Home) with a Any DID/Any CID everithing works.

But I can't configure a DID.

I configured an EXT-DID:

[ext-did]
exten => s,1,WaitForDigits(6000,2,true,15)
exten => s,1,Set(__FROM_DID=${EXTEN})
exten => s,n,Gosub(app-blacklist-check,s,1)
exten => s,n,GotoIf($[ "${CALLERID(name)}" != "" ] ?cidok)
exten => s,n,Set(CALLERID(name)=${CALLERID(num)})
exten => s,n(cidok),Noop(CallerID is ${CALLERID(all)})
exten => s,n,Goto(from-did-direct,452,1)

But something is wrong, because the asterisk give me a no-service message.
I think the problem can be that the card doesn't receive the last two numbers of the called number, but only the radix 011197111.
How can I configure it to get all the digits?

This is a part of log:

P[ 1] I SEND:SETUP_ACKNOWLEDGE oad:0******** dad:011197111 pid:9
P[ 1] --> bc_state:BCHAN_ACTIVATED
P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1] --> info_dad: onumplan:2 dnumplan:2 rnumplan: cpnnumplan:0
P[ 1] --> caps:Speech pi:3 keypad: sending_complete:1
P[ 1] --> screen:0 --> pres:0
P[ 1] --> addr:50010102 l3id:20020 b_stid:10010100 layer_id:50010180
P[ 1] --> facility:Fac_None out_facility:Fac_None
P[ 1] --> urate:0 rate:16 mode:0 user1:0
P[ 1] --> bc:8c675a4 h:0 sh:0
P[ 1] * Starting Ast ctx:from-pstn dad:011197111 oad:0******** with 's' extension
P[ 1] GOT SETUP OK
P[ 1] Freeing Msg on prim:30582
P[ 1] Sending msg, prim:30d80 addr:41000104 dinfo:20020
== Starting mISDN/3-u67 at from-pstn,011197111,1 failed so falling back to exten 's'
== Spawn extension (from-pstn, s, 1) exited non-zero on 'mISDN/3-u67'
P[ 1] * IND : HANGUP pid:9 ctx:from-pstn dad:s oad:0******** State:DIALING

[Rejil Rajan]

Hi Andrew

So ur using Asterisk@Home for your setup. If the Any DID/CID feature is working for you, that means the line is through. Have you check with the teleco the number of digits they sending through the line. If not you can set the verbose of your asterisk server to 5 and make call to your DID number. If you could pass me the logs from the CLI for the incoming call, i could help you solve the DID issue